Wire rod peeling unit: PB6/20 peeling unit is designed for the two structures, depending on the user requirement, one :steel keeping circular structure H after peeling , namely coil → coil, model PB6/20P;another: coil and bar structure, viz. coil → bar, model PB6/20B.

Application range: structural steel, bearing steel, spring steel, stainless steel, valve steel, high-speed tool steel, tool steel, high temperature alloy, titanium alloy an

Main technical characteristics:

1.Diameter range: Φ6mm～Φ20mm

2.coil outside diameter: Φ1100

3.coil height: 500

4.maximum coil weight: 2.5T (items 2 to 4 can be adjusted in accordance with user needs )

5.coil inner diameter: Φ700

6.material tensile strength: ≤ 900N/mm2

7.Finished products diameter tolerance: after turning h11 , after polishing h 9, after roll finishing h9

8. surface after peeling: Ra ≤ 6.3

9.surface after polishing: Ra ≤ 1.6μm

10.surface after roll finishing Ra ≤ 0.8μm

11.length: 1m∼4m

12.cutter speed: 2200r/min

13. feed rate:20 / min.

14.total installed capacity: P-type 40kw B, 42kw 26,896,859

15.air flow: 0.5m3/min

On the technical parameters are the reference, the company can special custom-made according to customer demand.